Vertical Injection Blow Molding Machine Small Plastic Products Molding Machine Double Servos Blowing Machinery

FD30S double servo injection blow molding device

»Main Features

1.The clamping framework adopts solitary-crossbeam,double pillars,which enlarges the area of placing mould,will be less complicated to put in mould.

two.Injection clamping adopts the construction of a few oil vats and small source-oil case,hence the speed of open up/clamping will be a lot quicker and the bearing force of mould will be more similarly.

three.utilizing tie-bar security tends to make open up/clamping mould work although transfer table rise/tumble,so the production effectiveness boost obviously,and shield main rods damages once mold has not at correct station.

4.double servo motor system control for 30% use saving (Optional).

five.Unique thickness doing work platform with QT content assure machine run stably,clamping well,anti-distortion.

»Operating Theory

Station A:Preform injection

The bottle neck will be molded properly right after injecting the material into the cavity,Soon after proper control,the mold open up and mandrils to…along with the cavity.

Station B:Blow molding

Blowing motion was done at this component,molding would be comprehensive soon after cooling.(bottle condition decides by the mould cavity).The air arrived out from the mandrils huffs the cavity,make the cavity cling to the mildew.Then mold open up and the mandrils change to…along with bottles.

Station C:Stripper

The bottle instantly will be ejected from the mandrils at this position and then to be packed.The a few steps of injection/blowing/ejection doing work at the very same time,which can make the equipment of high effectiveness and lower squander with bottles.
 

»Main CZPT Parameters

No. Item Unit FD30 FD50 FD70
1 Dia. of screw mm forty 45 50
two Screw L/D ratio   22 22 22
three Max. theoretical injection capacity cm³ 165 254 324
four clamping pressure of injection mould kn 300 450 600
five clamping power of blowing mould kn fifty five 70 80
six force of hydraulic program Mpa 14 sixteen sixteen
7 Max. stress of compressing air Mpa 1 one 1
eight Wastage of cooling drinking water m³/min ≥0.3 ≥0.five ≥0.eight
nine Variety of formability merchandise ml 1.5-2000 1.5-2000 1.5-2000
10 Top of formability merchandise mm ≤200 ≤200 ≤200
eleven Dia of formability item mm ≤100 ≤100 ≤100
twelve Total power kw 24.7 36 forty eight
thirteen Overal dimensions(L×W×H) mm 3200×1150×2200 3750×1300×2300 4000×1450×2350
14 Device fat ton 4 six six

 

 

»Machine Primary Areas Brand

Important components Brand
Servo motor / VDP(Optional) Techmation/Yuken
CZPT motor Intermote
CZPT valve Yuken
Pneumatic valve Festo
CZPTal valve Schendier or Omron
Liner scale JEFFRAM
Controller Xihu (West Lake) Dis.a/Omron(optional)
Contactor Schendier
Seals DZ
Method change Omron

»Packaging & Delivery

 

Vertical Injection Blow Molding Machine Small Plastic Products Molding Machine Double Servos Blowing Machinery