Speed 745r Min Yrkk Hv Slip Ring Induction Motor

The power stage, installation proportions and electrical efficiency of the HV large-voltage slip ring three-section asynchronous motor are in compliance with pertinent IEC specifications. The simple set up strategy of the motor is the horizontal bottom angle (IMB3), the doing work technique is the constant doing work program (S1), and the wound rotor is made of Course F insulation substance.
The bearing of HV wound rotor slip ring motor has two varieties of rolling bearing and sliding bearing, depending on the motor electrical power and speed. If the motor has a substantial diploma of protection, the security amount of the bearing will also enhance. The rated frequency of the motor’s energy offer is 50Hz, the rated voltage is 6000V/10000V, and the simple variety of safety is IP54. The motor slip ring housing can be guarded to IP22 or IP23. Other voltage, frequency and degree of security motors are also CZPT upon ask for.
HV winding rotor slip ring motor main outlet box is IP54 protection grade, normally put in on the proper facet of the motor (facing the motor shaft extension end), can also be installed on the remaining facet of the motor in accordance to the get specifications. Inside of the major outlet box, outside the house There are individual floor terminals.
HV winding slip ring motor raises the setting and bearing temperature measuring device. It can also incorporate heating gadget inside of the motor. The shaft extension key of the motor normally adopts the tangential key, and the motor carbon brush is not lifting structure.
HV wound rotor slip ring motor can be utilised to travel a selection of various machinery, these kinds of as compressors, pumps, crushers, chopping equipment instruments, transportation machinery and other mechanical gear, in mining, equipment industry, petrochemical sector, electricity crops, and so forth. Employed as key mover in various industrial and mining enterprises. The motor utilized to generate the blower, coal mill, rolling mill and winch should point out the objective and technical requirements when buying, and undertake specific style to guarantee dependable operation.

Center height range: H355 ~ 1000mm
Energy selection: 220kW ~ 10000kW
Number of poles: 2/4/six/8/10/12
Rated voltage: 3000V/6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Security stage: IP23 or IP44
Insulation class: F
Function system: S1 (ongoing)
Cooling technique: IC01/IC611
Installation sort: IMB3
Motor link: Y (3 outlet terminals in the junction box, the junction box from the extension of the spindle is found on the appropriate aspect of the foundation)
Altitude: no a lot more than 1000m
This sort of motor is suitable for use in environments in which the ambient air temperature does not exceed 40 ° C and there is no critical dust, the least ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a moist heat or substantial-altitude motor).

No. Squirrel-cage motor Y JS YKK YKS Y2, Y3
Slip ring motor YR JR JR2 YRKK YRKS YR2, YR3
one Framework Box-sort building, created up of steel plates welded with each other Compact struction
2 Cooling technique IC01 or (IC11, IC21, IC31) IC611 or IC616 IC81W IC411
three All-natural air flow, with best mounted defense go over With leading mounted air-air cooler With prime mounted air-h2o cooler  
four Security sort IP23 IP44 or IP54 IP44 or IP54 IP54
five Insulation F
6 Mounting arrangement IMB3
seven Voltage CZPT 380 v, 2400 v, 3kv, three.3kv  4160 v,    6kv, 6.6kv      10kv, 11kv
8 Frequency CZPT 50Hz , 60Hz

The HV wound rotor slip ring motor can enhance the big beginning torque at a small starting up existing. The motor is suitable for apps exactly where the potential of the feeder line is inadequate to start the squirrel-cage rotor, the beginning time is prolonged, the starting is repeated, and the little-range pace regulation is essential. This series of motors has the benefits of substantial efficiency, energy saving, reduced sounds, minimal vibration, light-weight fat, reputable overall performance, convenient installation and upkeep.

Principal procedure movement of the motor
Motor stator: casing processing → punching push → iron main seating → coil making → weaving → dipping paint drying
Digital rotor: blank shaft processing → iron core press installation → iron core cast aluminum → rotor string shaft → weave → dipping paint drying → dynamic balance
Motor assembly: stator rotor assembly → device take a look at → motor look coloring → packaging storage

1. The outer packaging of the items are all regular export-oriented picket plywood packaging.
2, the item packaging is secured by moisture, h2o plastic soft packaging
three. For items with particular transportation requirements (this sort of as temperature, fragile, variability, and effortless to get damp), the packaging security steps will be strengthened, and the goal mark will be printed on the package.
4. There are apparent signs and symbols on the packing box that need to be paid out attention to throughout transportation and storage (this kind of as position, moisture, rain, shockproof, lifting position, and many others.).

 

Speed 745r Min Yrkk Hv Slip Ring Induction Motor