| Fundamental Information | Dimension(mm) | 29×25×27.1 | |
| Fat ( g ) | eighty | ||
| Get in touch with Arrangement | 2A/2B | ||
| Contact Content | AgSnO2 | ||
| Ambient Temperature | -forty five~+85ºC | ||
| Vibration | ten~50Hz,.075mm | ||
| Shock | 1000m/s²,(100g) | ||
| Specifications Information | Nominal Voltage | 9~36VDC | |
| Electricity Consumption | <2W | ||
| Functioning Voltage | 7.2V | ||
| Max. Motor Voltage | 24V | ||
| Max. Switching Present | 100 A | ||
| Surge Current | 6000A/10ms | ||
| Motor Resistance(R±20%) | 30Ω | ||
| Contact Score(Res) | 250VAC,100A | ||
| Speak to Voltage | <60mV | ||
| Speak to Resistance | <0.6mΩ | ||
| Dielectric Strength | Motor to Make contact with | >4000VAC 1min | |
| Across Open Make contact with | >2000VAC 1min | ||
| CZPTal Lifestyle | >10000 | ||
| Mechanical Lifestyle | >100000 | ||
| Pulse Time | 40ms~60ms | ||
| Selecting-up Time | <65ms | ||
| Release Time | <65ms | ||
| Off Get in touch with Length | ≥0.8mm | ||
| Insulation Resistance | >1000MΩ(500VDC) | ||
Cautions of Latching Relay:
1.Tips of relay’s input
(one)Polarity-Make sure you verify the polarity inside of our technological specification, if one coil then”+ -” or “- +”are wonderful,
you can alter it by one particular pulse.If double coil then it truly is essential to confirm “-+-” or “+-+”ahead of leaving the our manufacturing facility.
(2)Driving-Please energize the relay at our suggest pulse width, rated voltage for trustworthy performance, if 1.five
occasions or two times of benefit or decrease driving condition plz affirm with our engineer.
(three)Relays’contact status may be altered throughout transportation or set up thanks to impact of exterior drive,
consequently remember to reset to the necessary standing.
two.Recommendations of relay’s output
(1)When choosing the relay with challenging relationship,you should steer clear of the exterior force on load terminals in the course of or following
the set up.
(two)When the relay will be linked with screw or bolts to the relays’ terminals, plz make positive your link is
mounted and avoid relay from damages or other protection troubles owing to temp. Rise..
(three)The sampling sign wires of items are restricted, you should do not pull or torque during installation.
